White-rodgers 1F97-71 Manuel d'utilisateur télécharger pdf (Page 5)

OPERATING YOUR THERMOSTAT

Before you begin programming your thermostat,

you should be familiar with its features and with the

display and the location and operation of the ther-

mostat buttons. The information in this section will

help you become familiar with your new thermostat

so that you can easily program it.

Your thermostat consists of two parts: the thermo-

stat body and the subbase.

Remove power from the system at the

circuit breaker/fuse box before removing

or attaching the thermostat body. Equip-

ment damage and/or personal injury could

occur.

The subbase is attached to the wall, but you can

remove the thermostat body for easy program-

ming. To remove the thermostat body from the

subbase, grasp the thermostat body and gently

pull it straight out from the subbase. To attach the

thermostat body, line up the three terminal pins on

the lower section of the thermostat back with the

matching connector on the subbase. Insert these,

then gently pivot the thermostat body up to connect

the six pin connectors on the upper portion of the

thermostat back. Gently push until the snap con-

nectors engage. DO NOT FORCE OR PRY THE

THERMOSTAT, as this may damage the unit.

CAUTION

1 2 3 4 5 6 7 8 9 10 ... 39 40

Pas de commentaire

White-rodgers 1F97-71 Manuel d'utilisateur Page 5